3/4 HP Elite TENV Stainless Electric Motor With Base
3/4 HP Elite TENV Stainless Electric Motor With Base
The 3/4 HP Elite TENV Stainless Electric Motor With Base is a single-phase, dual-voltage boat lift motor. The welded base of the motor is compatible with standard mounting patterns found on flat-plate gear plates, which are commonly used in boat hoists to lift and lower boats. Made from stainless steel housing and features aluminum end plates that resist corrosion and rust. The heavy marine-grade gasket on the stainless steel capacitor housing helps keep water and dust out. Easy to wire with standard yellow T-Wires and works with any known drum switch or boat lift remote.
This motor is engineered to seamlessly integrate with a range of flat-plate hoists from reputable brands like Boat Hoist USA, ACE Labs, American Power Hoist, AMS, and Hefty Hoist. It comes with detailed wiring instructions compatible with Breams and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. Furthermore, this motor is equivalent to the Leeson boat hoist motor #6439191252, providing comparable performance and reliability.
This motor has two voltage options: 115 volts or 230 volts. It operates on a single phase and has a power of 3/4 horsepower. The amps vary depending on the voltage, with 11.2 amps at 115 volts and 5.6 amps at 230 volts. It rotates at 1725 RPM with a frequency of 60 Hz. The frame size is 56c, and it has a service factor of 1.15. The motor type is C, with a full load current (SFA) of 12.4 amps at 115 volts and 6.2 amps at 230 volts. It can withstand temperatures up to 40°C and has a time rating of 15 minutes. The housing is coded as TENV, and the insulation is rated as F. It doesn’t have thermal protection. Additionally, it is recognized with a UL stamp of C-UL-US.
Totally Enclosed Non-Ventilated (TENV)
A Totally Enclosed Non-Ventilated motor is a type of electric motor that is enclosed to prevent the ingress of foreign particles (dust, moisture, etc.) but does not have external ventilation openings for air circulation. Unlike some other motor types, TENV motors do not rely on external airflow for cooling and are designed to operate in a sealed environment.
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 26.65 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.50 in. | Product Width: | 6.75 in. |
| Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93047 | Retail SKU: | 93082 |
Nameplate Specifications |
|||
| HP: | 0.75 (3/4) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 11.2 (115v) / 5.6 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 12.4 (115v) / 6.2 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | H |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recongnized | UL Stamp: | C-UL-US |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 8.5 in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 700 uF |
| Capacitor SKU #: | BH02245 | Keystock: | Included |
| Keystock Length: | 1 5/16 in. | Keystock Width: | 3/16 in. |
Product Overview
{{dc:woocommerce:product_short_description}}
buy this product give
it a 4 or 5-Star rating.
