Boat Hoists

4,000 lb. Standard Gear Plate Assembly

4,000 lb. straight line capacity Assembled & tested under load before shipping No stee...

6,500 lb. Deluxe Gear Plate Assembly

6,500 lb. straight line capacity Assembled and tested under load No steel-on-steel moving...

7,500 lb. Advanced Gear Plate Assembly

7,500 lb. straight line capacity Assembled and tested under load No steel-on-steel moving...

8,500 lb. Advanced Gear Plate Assembly

8,500 lb. straight line capacity Assembled and tested under load No steel-on-steel moving...

SKU: 75621

Flat-Plate Drive Pipe Connector Kit

Connects drive pipe to flat-plate hoist Zinc-plated fasteners Grade 5 hex head bolt 16 thr...

SKU: 75620

Block Assembly Fastener Kit

Complete kit for mounting short or extended block Used on BH-USA gear plates 5/16 in. stai...

Drive Pipe Mounting Bolt

Hex head bolt to mount drive pipe to boat hoist 30,000 lb. sheer strength Zinc-plated 1/2...

SKU: 12266

10 in. Aluminum Die-Cast Dual Belt Hoist Pulley

Made from dual cast aluminum Features belt gripping technology For twin drive flat-plate b...

SKU: 12259

10 in. Aluminum Die-Cast Hoist Pulley

Made from cast aluminum Fits 1/2 in. drive belts 3/4 in. (.750) bore Warping resistant Bel...

SKU: 12273

10 in. Zinc Die-Cast Hoist Pulley

Made from zinc die castting Includes a 3/16 in. set screw 10 in. outer diameter Belt gripp...

SKU: BH02267

11 in. Zinc Die-Cast Hoist Pulley

Made from zinc die castting Includes a 3/16 in. set screw 10 in. outer diameter Belt gripp...

SKU: BH09003

12 in. Zinc Die-Cast Hoist Pulley

Made from zinc die castting Includes a 3/16 in. set screw 10 in. outer diameter Belt gripp...

SKU: 36434

2 7/8 in. Small Snap Ring

Zinc-plated 2 7/8 in. retainer ring Holds backplate bearing in place Uses snap ring pliers...

SKU: 36435

3 1/2 in. Large Snap Ring

Zinc-plated 2 7/8 in. retainer ring Holds backplate bearing in place Uses snap ring pliers...

SKU: 82014FA

3/4 in. Drive Shaft Collar

Holds shaft into place Plated for protection 5/16 in. set screw included 3/4 in. shaft col...

SKU: 89101P

96 Tooth Cast Iron Worm Gear

Made from solid cast iron The 96-tooth is made with precision machining Only includes the...