1 HP Elite TEFC Stainless Electric Motor With Base
1 HP Elite TEFC Stainless Electric Motor With Base
The 1 HP Elite TEFC Stainless Electric Motor With Base is a single-phase, dual-voltage boat lift motor. The housing is made from stainless steel and features aluminum end bells. The welded base of the motor is compatible with standard mounting patterns found on flat-plate gear plates, which are commonly used in boat hoists to lift and lower boats. These motors are ideal for use in boat houses and areas with limited ventilation.
This motor is engineered to seamlessly integrate with a range of flat-plate hoists from reputable brands like Boat Hoist USA, ACE Labs, American Power Hoist, AMS, and Hefty Hoist. It comes with detailed wiring instructions compatible with Breams and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. Furthermore, this motor is equivalent to the Leeson boat hoist motor #6439191252, providing comparable performance and reliability.
This motor operates at two voltage options: 115 volts or 230 volts. It’s a single-phase motor with a power of 1 horsepower. The amperage varies depending on the voltage, with 15.6 amps at 115 volts and 7.8 amps at 230 volts. It rotates at 1725 RPM with a frequency of 60 Hz. The frame size is 56c, and it has a service factor of 1.15. The motor type is C, with a full load current (SFA) of 17.5 amps at 115 volts and 8.75 amps at 230 volts. It can operate in temperatures up to 40°C for 30 minutes. The housing is coded as TEFC, and the insulation is rated as F. It doesn’t have thermal protection. Additionally, it’s pending UL certification with a UL stamp of C-UL-US.
Totally Enclosed Fan Cooled (TEFC)
A Totally Enclosed Fan Cooled motor is an electric motor that is enclosed to prevent the ingress of foreign particles (such as dust and moisture) and is equipped with an external fan for cooling. Unlike Totally Enclosed Non-Ventilated (TENV) motors, TEFC motors use an external fan to circulate air over the motor, helping to dissipate heat generated during operation.
TEFC motors are commonly used in various industrial applications where a higher level of protection against environmental factors is required. The enclosed design with a fan helps maintain the motor’s internal components at a suitable temperature, ensuring efficient and reliable operation.
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 30.00 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.75 in. | Product Width: | 6.50 in. |
| Product Height: | 9.0 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93048 | Retail SKU: | 62544 |
Nameplate Specifications |
|||
| HP: | 1 | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 15.6Â (115v) /Â 7.8Â (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 17.5Â (115v)Â / 8.75Â (230v) | Type: | C |
| AMB: | 40°c | Time: | 30 MIN |
| HSG: | TEFC | Code: | H |
| Insulation: | F | Thermally Protected: | None |
| UL: | Pending | UL Stamp: | C-UL-US |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 9.0Â in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
| Capacitor SKU #: | BH02246 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Product Overview
{{dc:woocommerce:product_short_description}}
