1 HP Heavy Duty Elite TENV Bremas Wired Motor with Base

The 1 HP Heavy Duty Elite TENV Bremas Wired Motor with Base is a single-phase, dual-voltage (115v/230v) boat lift motor. The motor has a painted coating on the housing. The welded base of the motor is compatible with standard mounting patterns found on flat-plate gear plates, which are commonly used in boat hoists to lift and lower boats.

This motor is engineered to seamlessly integrate with a range of flat-plate hoists from reputable brands like Boat Hoist USA, ACE Labs, American Power Hoist, AMS, and Hefty Hoist. It comes with detailed wiring instructions compatible with Breams and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. Furthermore, this motor is equivalent to the Leeson boat hoist motor #6439191252, providing comparable performance and reliability.

You can choose between a Bremas maintained (lock-on) or momentary (spring-loaded) boat lift switch. Both switches are connected with 14/5 SJTW control cable, with the in-line GFCI located 4 1/2 inches away from the plug. The type of plug and GFCI wired to the wiring harness depends on your motor voltage selection.

This heavy-duty motor has a power of 1 horsepower (HP) and can operate on either 115 volts or 230 volts. When running on 115 volts, it draws 13.0 amps, and on 230 volts, it draws 6.5 amps. It spins at a speed of 1725 revolutions per minute (RPM) with a frequency of 60 Hz. It fits into frame 56 and has a service factor of 1.25. It can handle up to 15.7 amps at 115 volts or 7.7 amps at 230 volts. It’s built to withstand temperatures up to 40°C for a maximum of 15 minutes. The housing is Totally Enclosed Non-Ventilated (TENV) with a code of L. It has insulation class B and is recognized by UL with a C-UL-US stamp.