1,500 lb. Belt-Driven PWC Hoist Gearbox
In stock
1,500 lb. Belt-Driven PWC Hoist Gearbox
The 1,500 lb. Belt Driven PWC Hoist Gearbox is a complete PWC hoist without an electric motor included. 1500 lb. straight-line lifting capacity. Features a Bronze Single Thread PWC Worm, 3/4″ Drive Shaft Collar, and all stainless steel fasteners. No steel-on-steel moving parts. Designed with a 48-tooth 6 in. PWC hoist cast iron worm gear. The bronze gear turns its own cable drum on the bronze bearing. Mounted into a strong, powder-coated white steel housing. 56 frame electric motor mounting slots are on top of the unit. Mount a PWC lift motor on the top of the unit with a motor pulley. The 26 in. drive belt runs on the motor pulley and 7 in. hoist pulley to turn the gears. 48:1 gear ratio.
Includes:
Complete Gearbox Assembly
7″ Zinc Die-Cast PWC Hoist Pulley
AX-26 – 26″ BH-360 PWC Drive Belt
Specifications
General Specifications |
|||
|---|---|---|---|
| Lifting Capacity: | 1,500 lbs. | Weight: | 28 lbs. |
| Gear Ratio: | 48:1 | Gearbox Length: | 7 in. |
| Gear Material: | Cast Iron | Gearbox Width: | 8.5 in. |
| Gear Size: | 6 in. | Gearbox Height: | 9.5 in. |
| Motor Type: | With Base | Manufacturer: | BH-USA |
Technical Specifications |
|||
| Worm Material: | Hardened Bronze | Worm Thread: | Single |
| Worm Bore: | 0.75 in. (3/4 in.) | Worm Keystock Groove: | 0.1875 in. (3/16 in.) |
| Gear Tooth Size: | 48 | Winch Mount Pattern: | 3 Hole |
| Hoist Pulley Size: | 7 in. | Pulley Material: | Die-Cast |
| Pulley Belt Width: | 0.75 in. (3/4 in.) | Belt Size: | 26 in. |
| Belt Type: | Cogged | Collar Size: | 0.75 in. (3/4 in.) |
| Collar Set Screw Size: | 0.3125 in. (5/16 in.) | Fasteners Material: | Stainless Steel |
| Bolt Type: | Hex Head | Grease Fitting Size: | 0.25 in. (1/4 in.) |
| Spool Drum Diameter: | 1.5 in. | Spool Drum OD: | 3.6875 in. (3 11/16 in.) |
Product Overview
{{dc:woocommerce:product_short_description}}
