“Best boat lifts in the country. Highly recommended”
Marc Smith
$6,792.17
Only 1 left in stock
BH-USA provides four stock options: In Stock, Available, Currently Unavailable, and Out of Stock. Here’s a brief overview of each:
BH-USA aims to offer a reliable shipping experience. We work with preferred shippers for timely delivery of ground and freight orders. Specific shipper requests and third-party pickups are not allowed due to security reasons. Ground orders are shipped without a signature requirement, and we provide tracking information for monitoring. If items are marked as received but missing or damaged, BH-USA cannot be held responsible. In case of delivery issues, check with neighbors and the carrier directly, as delivery may extend until 10 pm. Contact us within 30 days of the expected delivery date for assistance in resolving any problems.
For freight orders, customers are responsible for unloading as freight carriers do not provide this service. Shipping to commercial addresses with forklift access is recommended for smoother delivery. Residential delivery requires proper access and unloading equipment and assistance. Failure to comply may result in the order being returned to BH-USA with a credit issued after deducting all freight costs and a restocking fee of up to 20%. BH-USA is not responsible for hindrances caused by factors like gate access or neighborhood restrictions. Specific freight delivery requests should be directed to the carrier. Before signing the delivery ticket, verify shipment completeness and inspect for visible damage, taking photographs if needed for smoother claims processing.
BH-USA will refund your purchase price for eligible items up to 30 days from the purchase date. Using our simple return system, enter your order number or log into your account and if your item is eligible for return, a return link will be displayed. Simply follow the link to get a pre-paid UPS label.
BH-USA will only accept returns that are processed through the BH-USA simple return system. Items that were not purchased directly through BH-USA are not eligible for returns. Simple return system is only for ground orders. For freight, please call customer service at 1-800-259-8715 for further assistance.
Freight Returns: Customers are responsible for arranging and coordinating the return shipment of all freight items. BH-USA will not provide return bills of lading (BOLs) or authorize the use of BH-USA shipping accounts for return shipments. All return freight arrangements and associated shipping costs are the customer's responsibility.
Any rigging hardware and special order items are non-refundable. Certain manufacturer products may have restocking fees applied. All returned items must be in new condition, in its original packaging and include all tags, accessories and documents. BH-USA reserves the right to deny any return that does not meet the return requirements.
Have questions about this product? Contact us.
The 6,000 lb. Galvanized Four Post Pile Mount Boat Lift is a robust and durable solution designed to securely lift and support boats weighing up to 6,000 pounds. This boat lift is specifically designed to mount on the tops of four dock pilings, providing a stable and reliable platform for boat owners.
With its all-welded design and hot-dipped galvanized finish, this boat lift offers exceptional strength and resistance to corrosion, ensuring long-lasting performance even in harsh marine environments. The galvanized finish adds an extra layer of protection, making it suitable for saltwater applications.
The boat lift comes equipped with two 3/4 HP motors, each attached to a 13 ft. galvanized top beam. These motors are operated using maintained drum switches, providing easy control and smooth lifting operations. The motors are wired with a 16 ft. and 45 ft. control cable, allowing flexibility in installation and positioning.
For secure boat lifting, the lift includes two 4,000 lb. standard powder-coated gear plate assemblies with hoist covers. These gear plate assemblies feature a 96:1 bull gear ratio and a hardened bronze worm, ensuring reliable and efficient lifting performance. The gear plates are complemented by a 10-inch hoist pulley made of zinc die-cast, further enhancing the lifting capacity.
The boat lift also includes four guidepost stanchions, PVC pipes, and black 48-inch split bumpers. These components assist in guiding and protecting the boat during the lifting process, minimizing the risk of damage.
To ensure proper installation, a 6K fastener kit is provided, which includes the necessary galvanized fasteners for securing the top beams to the pilings. However, it’s important to note that piling mount bolts are not included, and it is the buyer’s responsibility to obtain and install them.
The cradle width of the boat lift is determined by the center-to-center measurement between the pilings. It is crucial to have an accurate measurement to ensure the proper functioning of the boat lift. The lift comes with standard 12 ft. 6 in. cradle beams, but it’s essential to install the correct length of boat cradles based on the specific measurement.
The boat lift requires proper piling installation, with 8-inch pilings that are square, level, and adequately penetrate the seabed. The drive-end pilings should be 6 inches shorter than the other two pilings. Proper installation and alignment of the pilings are vital for the safe and effective operation of the boat lift.
Please note that installation of this boat lift should be carried out by experienced contractors or professionals familiar with boat hoist assembly and installation. Improper installation and maintenance may void the manufacturer’s warranty. It is recommended to thoroughly read and understand the assembly and use instructions before operating the boat lift.
The 6,000 lb. Galvanized Four Post Pile Mount Boat Lift is a high-quality and reliable lifting solution for boat owners. Its sturdy construction, galvanized finish, and powerful motors make it capable of lifting boats weighing up to 6,000 pounds with ease. With proper installation and maintenance, this boat lift will provide years of dependable service, ensuring the safe and convenient storage of your valuable watercraft.

6,000-lb galvanized boat lift is equipped with standard 12 ft 6 in cradle beams. If your pilings are already installed, it is essential to obtain a precise center-to-center measurement between the pilings. Your cradle length will be determined by this measurement. When the center-to-center measurement is 10 ft., then you will need a cradle length of 10 ft. If the correct length of boat cradles is not installed, issues can arise with how the boat lift operates.

To support the weight of the boat, the 8-inch pilings must be installed with enough seabed penetration. Each piling must be square and level with the others. Drive-end pilings (where the boat hoists are installed) should be 6 inches shorter than the other two pilings. After installation, movement of the pilings will affect boat lift operation and safety.

BH-USA flat-plate boat hoists are attached to the top beam with 1/2 in x 1 1/2 in bolts (included). Initially, mount the back of the flat-plate cover between the gear plate and the top beam. Align the hole in the drive pipe with the hole in the large gear sleeve. Set the gear sleeve bolt in place and snap the front cover into the back cover.
One of the flat-plate boat hoists is wired with an extra cable (45 ft) so that both drum switches can be mounted side-by-side. It is not recommended to wire both flat-plate hoists to one drum switch. For double motorboat lifts, we recommend using the GEM Remotes GR2 double motor boat lift remote. One to two boat lift motors can be operated simultaneously. It was designed to operate this type of lift.
Utilize lag or through bolts to secure the top beams to the pilings. Piling attachment bolts are not included.
The 10,000 lb. & 12,000 lb. galvanized boat lifts will come with 123 ft of boat lift cable. Unlike the 6,000 lb and 8,000 lb beams, the 10,000 lb & 12,000 lb beams have deadman brackets welded to each beam to attach your boat lift cable. Compounding blocks are included with boat cradles.
“Best boat lifts in the country. Highly recommended”
Marc Smith
“Awesome place to do business. Went there today to order a boat lift for the lake. Very nice employees and very knowledgeable of their products. I highly recommend this place for anyone who needs lifts for boats, barges, jet skis.”
Greg Lacour
“This place is hands down the best with excellent customer service. Big shout out to Jay for changing my tire and just being a stand up guy in this world!”
Christina
“Great family owned company providing quality products. Glad to see a company that still cares about it’s customers.”
Travis Lundy
“Awesome service, and super quick shipping time. Highly recommend. Thanks guys!”
Bruce Dedon
“Great company. I previously bought a pontoon lift which worked perfectly. Recently I had to buy a 10 pound cable weight for the ski boat. Again, great service and quality.”
Lee Arnett
“Perfect fit and replacement of old belt. Lift working perfectly again no slippage”
David Wix
“Quick delivery, quality product, reasonable price”
Sam Norman
“Great service! Easy to order & quick delivery!”
Mary Gullett
“Great transaction, quick delivery, product as described.”
Matt Hans
“BHUSA very helpful with rewiring of switch for motor”
Larry Peterson
“The perfect finishing touch to our new bulkhead. Glad the job is over.”
Sonny Shores