96 Tooth Cast Iron Worm Gear
96 Tooth Cast Iron Worm Gear
The 96 Tooth Cast Iron Worm Gear is also referred to as a bull-gear. Designed to fit any BH-USA flat-plate boat hoists. The worm gear mounts on the top of the gear plate. Grease fitting installed on the drive pipe opening. Match a cast iron gear with a steel bronze worm. Includes a 1/4 in. grease fitting. The 1/4 in. grease fitting is located on the middle sleeve opening.
Do not attempt to put a bronze gear on a bronze worm.
Does not include the sleeve, snap rings, bearing, or any fasteners.
Specifications
| Material | Cast Iron |
| No. of Teeth | 96 |
| Gear Bore w/o Sleeve | 2.875 |
| Diameter | 12.75 in. |
| Depth w/ Hub | 2 in. |
| No. of THDS | 1 |
| Match with | Single Thread Steel Worm Only |
| Weight | 11.70 lbs. |
Disclaimer: To enable existing hoist owners to repair or replace machined items, BH-USA makes available machine parts used exclusively in the Boat Hoist USA brand flat-plate hoist.BH-USA brand machined parts should NEVER be used with any other brand flat-plate hoist or machined parts. BH-USA does not warranty any individual machine part or any other re-built/repaired flat-plate hoists. Lift-Tex Inc. does not assume ANY liability for damages to a person or property when machined parts are used in the re-build of a flat plate hoist, regardless of brand. The purchase of, and use of any machine part sold by BH-USA is at the sole risk of the user and is non-returnable, and carries no warranty. BH-USA does not guarantee any individual machined part will fix an existing problem or work as designed. It is the recommendation of BH-USA to purchase a new flat-plate hoist that has been built and tested onsite at BH-USA rather than to attempt to repair an existing hoist.
Product Overview
{{dc:woocommerce:product_short_description}}
