BH-30 - 3,000 lb. Standard Flat-Plate Boat Hoist
- 3,000 lb. Lift Rating
- Standard series includes 4000 lb. gear plate and 3/4 hp motor
- Factory assembled and tested under load
- No steel-on-steel moving hoist parts
- Meets UL and NEMA requirements
- 2 in. motor pulley and 10 in. hoist pulley included
- Ships in (2) boxes
BH-30 – 3,000 lb. Standard Flat-Plate Boat Hoist
The BH-30 – 3,000 lb Standard Flat-Plate Boat Hoist is a single-phase, 0.75 HP electric motor with a lifting capacity of up to 3,000 lbs. It is made up of an Elite 0.75 HP painted electric motor with base and a 4,000 lb standard gear plate assembly. The motor is built from rolled steel and has a NEMA 56 shaft that is 0.625 inch thick and 1.88 inch extruding from the motor housing. The motor is UL Recognized and uses a capacitor to start.
The gear plate assembly has a rated lifting capacity of up to 3,000 lbs when used with a 3/4 HP electric motor. It is made from cast aluminum and has no steel-on-steel moving parts. The gear plate is assembled and tested by the manufacturer and comes with a lifetime warranty.
The hoist also includes a short block worm assembly with a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. The assembly attaches directly to the gear plate and has standard flat-plate mounting holes.
The BH-30 – 3,000 lb Standard Flat-Plate Boat Hoist is a great option for lifting and storing smaller boats. It is easy to install and use, and the lifetime warranty gives you peace of mind.
Here are some of the benefits of using a boat hoist:
- Convenience: Boat hoists make it easy to launch and retrieve your boat, even if you are not strong enough to do it by hand. This can save you a lot of time and effort, especially if you have a large boat.
- Safety: Boat hoists can help to prevent injuries, especially if you are lifting a heavy boat by hand. They can also help to protect your boat from damage, as they can be raised and lowered slowly and carefully.
- Storage: Boat hoists can be used to store your boat out of the water, which can help to protect it from the elements. This can extend the lifespan of your boat and make it easier to maintain.
If you are looking for a convenient, safe, and effective way to launch, retrieve, and store your boat, a boat hoist is a great option. The BH-30 – 3,000 lb Standard Flat-Plate Boat Hoist is a high-quality hoist that is easy to use and comes with a lifetime warranty.
Here are some additional details about the BH-30 – 3,000 lb Standard Flat-Plate Boat Hoist:
- Lifting capacity: 3,000 lbs
- Motor: 0.75 HP electric motor
- Gear plate assembly: 4,000 lb standard gear plate assembly
- Worm assembly: Short block worm assembly
- Warranty: Lifetime warranty
If you are interested in learning more about the BH-30 – 3,000 lb Standard Flat-Plate Boat Hoist, you can visit the BH-USA website or contact a local dealer.
MAINTAINED (LOCK-ON) VS. MOMENTARY (SPRING)
Maintained (Lock-On) is a cam rotary switch that stays in place when you turn the handle to either the up or down position. It will continue to move until the handle is moved back to its resting position.
Momentary (spring) must be held in place. Once the handle is released it “springs” back into the rest position.
You are able to distinguish between the two cam rotary switches by the markings on the box. If there are arrows between the positions, it is a momentary switch. If there are no arrows, then it is a maintained switch.