Shop

BH-360 PWC Lift Kit (No Ride Pipe)

360-degree turn radius when raised Includes guideposts, housing, and hoist Easy to install...

SKU: 15211

BH-360 PWC Lift Carpeted Bunk Kit

Treated 2 x 6 lumber wrapped in carpet Marine-grade black outdoor carpet Carpet installed...

SKU: 15205FK

BH-360 PWC Lift Fastener Kit

All fasteners to install a BH-360 PWC Lift Hot-dipped galvanized hardware Shackle, bunk an...

SKU: 304236

Lil Lifter Winch Wheel Fastener Kit

Attaches wheel to winch Comes with nut, spring, and cable stop fasteners Fits Demco 1000 l...

SKU: 62514

Lil Lifter 1200 lb Bunk Mount Kit

Made from 6061-T6 US aluminum Fits both Demco & BH-USA brand Lil Lifters Includes angl...

SKU: BH09348

Lil Lifter Bunk Mount Angle

All parts made from 6061-T6 US aluminum Fits Demco 1000-pound & BH-USA 1200-pound Lil...

SKU: BH09349

Lil Lifter Bunk Mount Backup Plate

Made from 6061-T6 US aluminum Fits both Demco & BH-USA Dockside Lil Lifters Used with...

SKU: BH09350

Lil Lifter Bunk Mount Bracket

Made from 6061-T6 US aluminum Fits both BH-USA & Demco Lil Lifters Used to mount cradl...

3,000 lb. Galvanized Steel Pontoon Boat Cradle

Designed for V-Hull boats up to 3,000 lbs. Made from hot-dipped galvanized steel Allows eq...

8,000 lb. Galvanized Steel V-Hull Boat Cradle

Designed for V-Hull boats up to 8,000 lbs. Made from hot-dipped galvanized steel Allows eq...

8,000 lb. Galvanized Steel Pontoon Boat Cradle

Designed for pontoon boats up to 8,000 lbs. Made from hot-dipped galvanized steel Allows e...

12,000 lb. Galvanized Steel V-Hull Boat Cradle

Designed for V-Hull boats up to 12,000 lbs. Made from hot-dipped galvanized steel Allows e...

12,000 lb. Galvanized Steel Pontoon Boat Cradle

Designed for pontoon boats up to 12,000 lbs. Made from hot-dipped galvanized steel Allows...

8 in. Aluminum Cradle Bunk

Each bunk is sold individually Stylish black rubber top for the hull to slide on Mark resi...

10 in. Aluminum Cradle Bunk

Aluminum Cradle Bunk Boat hull support Black rubber top Resistant to marking 19-degree ang...

SKU: 15160

PWC Skiff Lift Arm Assembly

Made from 6061-T6 Aluminum Welded in house Corrosion/rust resistant Smooth finish