The Max Overhead Boat Sling Lift
The Max Overhead Boat Sling Lift
The Max Overhead Boat Sling Lift can handle up to 12,000 lbs and features a strong top beam that’s 14 ft long, 3 1/2 in wide, and 6 in high. The top beam is made of sturdy I-beam material and has a protective galvanized finish. The drive pipe, which is 14 ft long and 2 3/8 in wide, is also galvanized and supported by sealed ball bearings. The lift uses a 2-part cable setup with stainless steel aircraft cable, each section being 50 ft long.
It operates using stainless steel A-Drives, rated at 7,000 lbs each. The gear system is efficient with a double-worm design, and the motor is a powerful 1 1/2 HP stainless steel type. Control is easy with two momentary switches that are GFCI-protected. The lift moves at a speed of 2 ft per minute and comes packaged in a wood crate. If you choose the cradle option, it includes everything needed for setup except for wood bunks. The lift is shipped via freight truck in a large wood crate and requires a fork truck for unloading. It’s important for the buyer to arrange for delivery and unloading, and the freight company can be contacted for assistance.
Specifications
| Boat Lift Capacity | 12,000 lbs. | Top Beam Dimensions | 14 ft. L x 3 1/2 in. W x 6 in. H |
| Top Beam Type | 12.5 lb. structural I-beam | Top Beam Finish | Hot-dipped galvanized |
| Drive Pipe Dimensions | 14 ft. x 2 3/8 in. OD (2 in. ID) | Drive Pipe Type | Sch. 40 |
| Drive Pipe Finish | Galvanized | Pipe Supports | Max Drive |
| Pipe Support Type | Sealed ball bearings & cable winders | Pipe Support Fits | 4 in. W flange beam |
| Cable Configuration | 2 part | Cable Diameter | .313 in. |
| Cable Length | (4) 50 ft. sections | Cable Type | 7 x 19 aircraft cable |
| Cable Style | Stainless steel | Pulley Finish | Galvanized |
| Pulley Style | Ball-bearing | Pulley Type | 4 in. 3 Ton snatch blocks |
| Fasteners | Stainless Steel | A-Drives | 7,000 lb. Rated Each |
| Gear Type | Double Worm (High Efficiency 40:90 Ratio) | Motor Size | 1 1/2 HP |
| Motor Style | Stainless steel | Motor Type | C-face |
| Voltage | 240 Volts | Drum Switches | (2) Momentary Switches (Spring-Loaded) |
| GFCI Protected | Yes | GFCI Location | In-line |
| Lift Speed | 2 ft. / Minute (Tested 24 in. in 58 seconds) | Shipping Container | 177 in. x 33 in. x 16 in. wood crate |
| Motor Brand | Elite Motors | Lift Points | Pre-Drilled for 10 ft. Apart |
When choosing the cradle option, the cradle comes complete with a chock angle for two bunks, guidepost stanchions, and guideposts. All hardware is included, and the wood bunks are not included. Cable and block savers are included with the cradle to keep cable and block from going into the water. By using cradles instead of slings the overall rating of the lift becomes 12,000 lbs.
The BH-USA Max lifts ship complete in one shrink-wrapped 15ft wood crate. The Lift is shipped via a freight truck and will not be able to be unloaded without a fork truck.
It is the purchaser’s responsibility to arrange a suitable delivery location, preferably a business, and have adequate ability to unload the lift from the truck. It is not the trucking companies or BH-USA’s responsibility to unload the truck.
The freight company will contact you if requested to arrange for delivery and delivery options.
Product Overview
{{dc:woocommerce:product_short_description}}
Product Guides
from this merchant give
them a 4 or 5-Star rating.
You may also like…
-
Gulf Breeze Overhead Boat Lift
$10,363.93 Add to cart -
The Max Overhead V-Hull Boat Lift w/o Overhead Beams
$5,229.70 – $6,186.26 Select options This product has multiple variants. The options may be chosen on the product page -
The Max Overhead V-Hull Boat Lift
$6,626.50 – $11,793.76 Select options This product has multiple variants. The options may be chosen on the product page -
Coastal Series Overhead V-Hull Boat Lift
$6,294.62 – $6,331.94 Select options This product has multiple variants. The options may be chosen on the product page
