Aluminum Pile Mount Top Beam Clamp
$73.75 - $86.65
- Slides on the bottom flange of aluminum top beams
- Mounts to the side of the dock piling
- Helps prevent side-to-side movement due to weather
- Made from 6061-T6 US aluminum
- Can be mounted on inside or outside of the dock piling
Special Order
Stock Policy
Shipping Policy
Return Policy
Aluminum Pile Mount Top Beam Clamp
The Aluminum Pile Mount Top Beam Clamp is a safety device for aluminum pile mount boat lifts. It slides onto the bottom flange of the aluminum top beam, which sits on top of the dock piling. This bracket adds extra security by attaching to the dock piling, preventing the top beam from moving sideways or lifting during rough weather. It’s designed without needing to be welded and uses stainless steel fasteners with PVC isolators, so the aluminum doesn’t touch the wood of the dock piling.
It comes in three sizes for different boat lift sizes and can secure top beams between 5 inches and 7 inches in channel width. The pieces that mount on the aluminum top beam are adjustable, making installation easier. Plus, it’s made from sturdy 6061-T6 US aluminum for durability.
| Top Beam Channel Width: | 5 in. | 6 in. | 7 in. |
| Fits Pile Mount Lifts: | 6,000 lb. – 8,000 lb. | 9,000 lb. – 10,000 lb. | 12,000 lb. – 24,000 lb. |
| Inside Clamp Spread: | No More than 7 3/4 in. | 8 1/4 in. | 10 1/4 in. |
Making Adjustments
The hex head bolts, flat washers, and nylock nuts factory installed. It holds the mounting bracket piece and the aluminum flange piece together. The rod and cap nuts are used on the adjustable brackets to secure to the bottom flange of the aluminum top beam. These will need tightening when installing the mounting bracket.
Dock piling mounting fasteners not included.
